If you’ve ever used a chainsaw, you know that a pull cord is essential for starting it up. Without the pull cord working correctly, your chain saw will be dead in the water – no matter how new or powerful it may be.
Unfortunately, if your Husqvarna chainsaw’s pull cord has stopped pulling back, then this article is exactly what you need! Here we’ll take you through each step of tackling this common issue so that you can quickly and easily get back to cutting wood with confidence.
A Husqvarna Chainsaw is the perfect tool for tackling tough projects, from trimming and pruning to tree felling and more.
These robust models are designed for dependable performance for an extended life, with low vibration technology for user-friendly operation and reduced chain chatter when cutting.
Featuring powerful X-Torq engines and air injection auto-cleaning systems that remove sawdust particles and prolong engine life, the professional-grade Husqvarna chainsaws guarantee easy starting, smooth handling and reliable performance.
With their adjustable oil pumps, they can help you control lubrication levels while running at different speeds; keeping your chainsaw in excellent working condition is easier than ever. Whether you’re a novice or a seasoned veteran of woodcutting projects, Husqvarna has the right chainsaw to suit your needs.
Husqvarna Chainsaw Pull Cord Won’t Pull
Having trouble with a Husqvarna chainsaw that won’t pull its starter cord? It can be frustrated if you dont know how to deal with it.
The most common cause is usually either carbon deposits or excess grit in the cylinder, both of which can be addressed by cleaning the cylinder and spark plug.
If that doesn’t help, check whether the flywheel brake is engaging properly or if the rewind spring needs tension. A malfunctioning kill switch may also need to be cleaned or replaced. And if all else fails, it’s best to reach out to an experienced professional for safe and timely repair.
What are Common Problems With Husqvarna Chainsaw
Common problems with husqvarna chainsaws include jammed chains, broken chain links, and difficulty starting the engine.
If your husqvarna chainsaw has a pull cord that won’t pull, the problem could be caused by bad spark plugs or ignition coils, incorrect gas-to-oil ratio, blockage in the fuel lines, or a clogged air filter.
It’s important to first check these components to troubleshoot the issue before attempting to assess any more serious damage.
To ensure life-long performance of your husqvarna chainsaw, it’s essential to read the owner’s manual and take preventative measures such as cleaning out and replacing air filters regularly.
How Do You Fix a Chainsaw Pull Cord Spring?
Repairing a husqvarna chainsaw pull cord can be simple, but it requires taking apart the gun and performing several steps.
The first step is to remove the recoil housing and inspect the spring for any signs of damage or wear. If it is required you can replace the spring. In some cases, all that is needed to fix a husqvarna chainsaw pull cord is tightening of mounting screws or bolts.
You should then lubricate areas such as the inner wall and pulley on the recoil before replacing it back onto the gun. Once this is done, you can test whether the husqvarna chainsaw pull cord will pull properly by pulling on it slowly — if it resists and doesn’t break, you have fixed your husqvarna chainsaw!
The Steps To Fixing a Pull Cord That Won’t Return On a Husqvarna
Maintaining your husqvarna chainsaw is key to ensuring it runs efficiently and safely. Unfortunately, chainsaws can experience problems with their pull cords that won’t return, making them impossible to start.
Fortunately, this issue can be relatively simple to fix as long as you have some basic tools and a few spare parts on hand. First, make sure the drive cord isn’t caught on anything or bent out of shape.
From there you should inspect the system for any sort of build up or sticking in the recoil spring area and disassemble if necessary. If the problem persists, replacing the classic starter will usually suffice! Taking proper care of your husqvarna chainsaw pull cord ensures that you’re working in a safe environment free from potentially hazardous situations.
Removal Of Recoil Cover:
Fixing a husqvarna pull cord that won’t return can seem like an intimidating task. Fortunately, with the right knowledge and set of tools it is not hard to do. The first step is to remove the recoil cover by taking off the four screws to access the inside components.
This will show you how the pulley system works and give you space to clear out any potential tangles or knots in the line or spring.
You will then need to ensure that the rope pulley and reel are properly connected and adjust accordingly if necessary before re-attaching the cover. With a bit of care, patience and problem solving, you should find that your husqvarna pull cord functions correctly again.
Installing A New Husqvarna:
If you’re having trouble with a pull cord on your Husqvarna lawn mower, chances are it’s time for a replacement. Replacing the old pull cord with a new one is actually quite simple and straightforward if you have the right tools.
Start by cutting away any frayed pieces of rope or string around the area where the cord was formerly attached.
Next, loop the new pull cord through the eyelets at either end of your Husqvarna engine, making sure each end is secured firmly in place.
Finally, attach the handle to the free end and give it a few pulls to get used to its tension before trying to start your mower again. With this method, getting your mower running should only take a few minutes!
Installing Pop Up Whip:
Replacing a pull cord on a Husqvarna can seem like a daunting task, but if you have the right tools and know-how, it doesn’t have to be stressful.
Knowing how to install a pop up whip is key to fixing a pull cord that won’t return. Before diving into the project, it’s important to make sure you understand the anatomy of a pop up whip and proper safety guidelines for working with cables and gasoline-powered engines.
After making sure you’re well informed, the next step is to remove the cover plate from the bottom of your Husqvarna. Doing this will allow you access to dismantle and reassemble components such as clutch drum and carburetor, which will ultimately assist in the installation process of your pop up whip.
Once all pieces are put in place, you can test out your new pull cord until it runs smoothly. With just a few steps and some know-how, replacing your Husqvarna pull cord with a pop up whip should no longer feel like an impossible task!
Conclusion:
As it turns out, if your Husqvarna chainsaw’s pull cord won’t pull, the problem is probably a simple one that you can fix yourself. First, check to see whether any dirt or debris has been lodged in the mechanism.
If it is there, then make sure to clean it first. If still the problem prolongs then it means that the spring that is present in starter housing is having some problems. This is a complicated process. So don’t put off fixing your chainsaw – with a little troubleshooting, you’ll have it up and running in no time!
Frequently Asked Questions:
What is the best way to fix a Pull Start that refuses to retract?
If your pull start won’t retract, the problem is likely either a broken spring in the starter housing or a tangle or knot in the pull cord. To fix it, you’ll need to open up the starter housing and check for signs of damage.
How do you fix a Chainsaw Pull Cord Spring?
In order to fix a chainsaw pull cord spring, you’ll need to open up the starter housing and remove the spring. If the spring is broken, you can purchase a replacement and install it in the same way.
Do you require an electrician to change a pull cord?
No, you wont need an electrician for this problem. You can usually do the job yourself with some basic tools and understanding of how the chainsaw works. If your not able to do it on your own you can do it with the help of a professional.
