Wood is not being cut by the chainsaw, it is being burned

Are you looking for a way to make fast and efficient cuts into wood? A chainsaw can be your best friend when it comes to cutting through tough pieces of wood, however sometimes the saw will not seem to do anything more than burn the wood instead. 

While this may come as an annoying obstacle halting your progress, understanding what is going on and how to address these issues could help get that chainsaw back in top shape! 

In this blog post we’ll look at what causes a chainsaw to burn or even spark while trying to cut through wood, so read on if you want some insight into how to fix this problem quickly.

Why does a chainsaw not cutting just burning wood

A chainsaw is a powerful tool that can be used to quickly and easily cut through pieces of wood; however, users should pay attention if their chainsaw is not cutting but rather just burning the wood. 

This could indicate a number of issues related to the chainsaw– from a dull saw blade or chainsaw teeth, loose chains, improper tension of chains, lack of lubrication, fuel not reaching the cylinder, spark plug damage or incorrect spark gap setting.

Knowing how to recognize and diagnose these problems is important for chainsaw safety as well as keeping the chainsaw in proper working order. Furthermore, making sure your chainsaw is regularly maintained and serviced will help ensure it cuts even and smooth through pieces of wood without burning them in the process.

The real reason behind a chainsaw not cutting wood

If you’ve recently been operating a chainsaw and noticed that the chainsaw wasn’t cutting the wood, but rather burning it, this could be happening for several reasons. Your chainsaw could have a dull chain or improperly set combination of chain speed and chain tension.

chainsaw

Additionally, your chainsaw may be incorrectly adjusted so the depth gauge is too close or the chainsaw isn’t properly fueled or lubricated. Chainsaws should be regularly serviced by an authorized technician to ensure their proper operation. 

If your chainsaw is still not cutting correctly following service, it could be that you need to check your engine’s spark plug for signs of wear and replace if necessary. Proper chainsaw maintenance and usage is key for chainsaws to perform correctly and safely, so it’s important to heed all safety precautions when handling any chainsaw.

What Are The Reasons Behind a Dull Chainsaw?

Chainsaws are an essential tool for anyone cutting wood. But chainsaw chains can become dull quickly, leaving you frustrated and wondering why it has happened. This can be caused by a number of things, such as having the chainsaw cut in the wrong direction, not properly maintaining your chains or chainsaw, or chains getting damaged while cutting abrasive materials such as rocks or concrete blocks. 

All of these problems can take a toll on chainsaw chains and result in a chainsaw that is not able to cut, but is instead burning through the wood. Proper maintenance and timely replacement of chains are key to tackling this issue and keeping your chainsaw working efficiently.

Why Is My Chainsaw Chain Burning Wood When Hot?

When using your chainsaw, it is important to know why and how your chain is heating up as this can have major consequences on the wood you are cutting .As the chain quickly rotates in the bar, it produces a large amount of friction which leads to heat generation. 

The more often you use the chainsaw in one spot, the more heat builds up at that particular point, resulting in what is known as “burning“. This burning can cause permanent damage to both the wood being cut and to your chain itself. To prevent overheating, ensure that you alternate between areas of the cut and that you adequately lubricate both your bar and chain when necessary. By following these steps you can make sure that the chainsaw is used for a longer time. 

Why Does Chainsaw Cut In A Curve?

Chainsaw cutting in a curve often causes confusion for many people.It’s vital to note that chainsaws have two sets of teeth. These sets consist of small and large teeth, which cut at different depths and angles to produce the desired curved results. 

This technique allows for more efficient cutting than if the blade were completely straight – not only does it increase speed, but it also reduces the likelihood of jamming or sending off unwanted chips and splinters when cutting through wet or tough materials. 

The depth and angle of the cuts will vary based on the type of chainsaw being used as well as size, length, type of wood, and other factors. Knowing how to properly use a chainsaw so it will cut in a curve helps prevent potential injuries while optimizing the performance of your saw.

What Could Be The Problem When Chainsaws Are Getting Fuel But Not Starting?

When a chainsaw is getting fuel but still fails to start, there could be a few potential problems. The spark plug might be dirty, the ignition coil might need to be replaced, or the carburetor may have improper settings. It’s important to troubleshoot these parts individually and ensure that they’re all functioning correctly before attempting any other solutions.

Additionally, an issue in the fuel line, such as a blockage or dried gas molecules, can prevent a chainsaw from starting up. If any of these possible culprits are ruled out and the saw won’t start up yet, then the problem most likely stems from something else elsewhere in the engine. 

Taking it to a professional repair shop is usually necessary at this point so that experienced professionals can correctly identify and fix the issue.

How Often Should You Sharpen a Chainsaw Chain?

If you use your chainsaw regularly, it’s important to keep the chain sharp. A dull chain can cause several problem. Check your chain before each use and sharpen it as needed. 

For most people, this will mean sharpening the chain every few uses. If you notice that the chain is dulling more quickly, it may be time to upgrade to a higher quality saw or chain. By taking proper care of your chainsaw and keeping the chain sharp, you can avoid accidents and extend the life of your saw.

Conclusion:

In order to cut through wood, a chainsaw must have a properly sharpened blade. If the chain is dull, it will not cut as efficiently and can overheat, causing the wood to burn. Be sure to keep your chainsaw blade sharp for optimal cutting performance!

FAQs

Can you overwork a chainsaw?

Yes, it is possible to overwork a chainsaw. Excessive use of a chainsaw can cause the blade to become dull more quickly, which can lead to accidents or injuries. Additionally, if you push your chainsaw too hard while cutting wood, it may overheat and start to burn.

Should we sharpen a chainsaw or buy a new one?

You don’t have a specific answer for this but If you use your chainsaw frequently or if the blade is starting to show signs of wear and tear, then it may be a good idea to invest in a new chain.

Is a chainsaw blade tight or not?

There is no right answer to this question, as it depends on the condition of your chainsaw blade and what kind of cutting you are doing. Generally speaking, a loose blade can be more dangerous, as it is more prone to kickback and may cause the saw to overheat.

Leave a Reply

Your email address will not be published. Required fields are marked *