Bathroom sinks that don’t splash With Detail Soultion
If you want to replace your bathroom sinks that don’t splash then this is your guide. Being in the process of replacing your sink gives you a chance to remove the issues with your previous sink with the new one.
Cleaning the bathroom sink after every use is a tedious job. If your faucet is too fast, the sink is too shallow or too deep then there will be a mess that you will have to dry out after every use. Sometimes the more difficult thing is that the surrounding tiles or items can get water marks or salt marks from the saline in the tap water. How to solve this problem? Sometimes you can replace the tap or faucet.
At other times you can just use an extender to help you with it. If not then you can also look at smoother tap flow, this will require an aerator. However if your sink is the main concern then you can replace it too.
Characteristics of a sink that doesn’t splash water everywhere
Here’s what to look for in a sink that does not splash water everywhere among other options that can help keep the mess at minimum. You can look for the following characteristics to help you with your sink.
The faucet of the sink should be able to line up over the drain. This allows the water to seep in without having to make way towards the drain.
The sink could be lower than the level of the surrounding shelf. This allows the water to flow into the drain directly rather than staying on top of the shelf. In case you spill the water around the sink you can always push it inside the sink bowl.
Size of the sink
You will need to make sure that the sink is not too short front to back. This is essential because it will allow the water that hits your face or arms will not spill in the basin and all around it rather it will easily flow into the drain.
The size of the overflow drain
Look into the option with a larger overflow drain. If you like to use higher water pressure and you do not want to reduce the water flow you can use an option with a larger drain and a bigger pipe.
Shape of the sink
Getting a curved or slanted sided sink is a better option if you get that over a flat and large sink you will be stuck with the water stagnating or drying on the sink. A pot sink with a deep bowl or a vertically slanted shape will allow the water to go down easily.
Height of the faucet
The height of the faucet also matters. If your faucet is too high the water will be splashing around. If the faucet is too low it will create a mess too. You should have enough room for the water to fall on your hands and then flow into the drain. The dimensions of the bowl should be large so that the spilled water is around in the bowl and not around the shelf.
You don’t really have to replace your sink. Perhaps a change of habits can help. You can also invest in the valve. A valve regulator with more speed settings will allow you to control the flow of the water.
Another way to reduce the water flow is through an aerator. An aerator will make the water spread out, you will have the water coming out smoothly though. Less water will be used but the pressure built up through bubbles will give you the spread and satisfaction of more.
Another solution can be if you try to be more cautious and wash your hands closer to the faucet that will save some mess. The easy way to handle the mess is also by keeping a fabric around you that will help you dry it quickly whenever you need it.
Using a pot sink will help you not splash any unwanted water. You must prioritize a larger sink over a more aesthetically smaller one if you are worried about water. In addition to the sink size you can upgrade your faucet and use a smoother faucet too. This should help in softening the water flow. Rectangle sinks will usually need a slanted slope to be drained properly and not stay on top of the sink or around it. Testing the sink before installing it can be a good way to try it and save yourself from another messy situation.